CEMS Manufacturers

EmiDAS and CEMWindows can interface with analysers manufactured by companies all over the world.
This page lists a number of companies that manufacturer CEMS Systems and analysers all of which can integrate with G2 Data Systems software.

ABB was established in 1988 with a revenue of in excess of US$27 billion (2019). ABB operates globally and focuses in robotics, power, heavy electrical equipment and automation.
Emissions monitoring is offered under the ‘Measurement and Analytics’ business area and operates in:-

CEMS for coal, gas, biomass and waste fired plants
CEMS for steel making and cement, including combustion of waste and biomass
CEMS for fired heaters, SMRs and steam boilers. Combustion and general process control gas analysers

For software to operate with ABB Analysers see CEMS Software

Chemtrols Industries was established in 1975 and provides solutions including:-

Ambient Air Quality Monitoring Systems
Continuous Emission Monitoring Systems
Flow Metering
Gas Detection
Process Analytics

Industries serviced include:-

Cement
Chemicals
Fertilizer
Oil & Gas
Paper & Pulp
Petrochemicals
Power
Steel
Textile

For software to operate with Chemtrols Analysers see CEMS Software

CODEL was established in 1982 to manufacture gas monitors and in 2014, joined with Forbes Marshall Group.
CODEL operates in a variety of areas including:-

Stack Emission
Tunnel Monitoring
Ambient Air Monitoring
Process Control

Products to monitor emissions in these areas include:-

Flow Monitors
Gas Monitors
Dust Monitors
Visibility Monitors
Air Quality Monitors
Single Point Flow Monitors
Electrochemical Cell Air Quality Monitors
Light Monitors
Cross Tunnel Flow Monitors

For software to operate with CODEL Analysers see CEMS Software

Dr Fodisch was established in Germany in 1991 and manufacturers CEMS monitoring solutions for air pollutants, dust and flow.
Dr Fodisch continuous emissions monitoring solutions operate in a variety of industries including:-

Biomass
Cement
Chemical
Metallurgical
Power
Waste incineration

For software to operate with Dr Fodisch Analysers see CEMS Software

Durag was founded in 1948 in Germany and now operates worldwide in the following areas:-

Combustion technology
Emission measurement
Ambient air measurement
Gas analysis
Tunnel sensors
Environmental data management
Process data management

For software to operate with Durag Analysers see CEMS Software

Ecotech was established in 1976 in Australia and in 2017 merged with ACOEM which was established in 1996 in France and specialises in reducing the environmental impact from:-

Noise and vibration pollution
Air quality
Industrial machines

Ecotech specialises in the following environmental monitoring product areas:-

Air monitoring
Water monitoring
Gas monitoring
Blast monitoring
Dust monitoring

For Air Monitoring applications sold include:-

Ambient Air Quality Monitoring Systems
Continuous Emissions Monitoring Systems
Background Air Quality Monitoring Systems
Tunnel sensors

For software to operate with Ecotech Analysers see CEMS Software

Emerson was established in 1890 and focussed on building Electric motors. Since then, Emerson has grown into a multi-billion dollar company with over 85,000 employees. The Automation division is responsible for their Emission Monitoring Systems using the Rosemount brand following the acquisition of Rosemount in 1976.
Emerson / Rosemount operates in the following industries:-

Chemical
Marine
Metals & Mining
Oil & Gas
Packaging
Petrochemical
Pharmaceutical
Power
Refining
Water & Wastewater

Emerson / Rosemount products offer the measurement and analysis of:-

Flow
Pressure
Density - Viscosity
Liquid Analysis
Gas Analysis
Temperature
Flame and Gas Detection
Tank Gauging
Corrosion & Erosion Monitoring
Flow Measurement & Blending Systems
Marine Measurement Analysis

For software to operate with Emerson Analysers see CEMS Software

Envea was established in 1978 to develop instruments that would automatically measure atmospheric pollution. In 2014, Envea acquired PCME who specialise in the manufacture of equipment for particulate measurement in industrial environments. In 2016, Envea acquired TDL Sensors Ltd who specialise in the development of high-resolution laser gas analysers.
Envea operates in the following areas:-

Biomass
Boilers & industrial furnaces
Cement plants
Chemical
Combustion
Gas turbines
Glass industry
Metal
Petrochemical
Power plants
Process control
Pulp mills
Waste-to-energy plants

Envea produces equipment that specialises in:-

Gas Monitors
Particulate CEMS
Mercury Instruments
Permanent Samplers
Flue Gas Velocity CEMS

For software to operate with Emerson Analysers see CEMS Software

Forbes Marshall was established in India in 1926 to supply steam equipment to the textile industry.
In 2007, Forbes Marshall joined with CODEL to manufacture emission monitoring systems such as:-

Gas flow monitors
Dust monitors
Insitu Gas Analysers
Coal Mill Analyser

Forbes Marshall operates in a wide range of industries such as:-

Cement
Chemical
Concrete
Fertilizer
Food
Oil & Gas
Paper & Board
Pharmaceuticals
Power
Rubber
Solvent Extraction
Steel
Sugar
Textiles
Water & Wastewater

For software to operate with Forbes Marshall Analysers see CEMS Software

Fuji Electic was founded in Japan in 1923 and specialises in the manufacturing of pressure transmitters, flowmeters, gas analysers, controllers, inverters, pumps, generators, motors, and power equipment.
For emissions monitoring, this incudes:-

Gas Analysers
Ultrasonic Flowmeters
Temperature Controllers
Pressure Transmitters
Level Transmitters

For software to operate with Fuji Electric Analysers see CEMS Software

Gasmet was founded in 1990 and expanded into the CEMS (FTIR) industry with the acquisition of Scanoptics.
With the additional acquisition of Quantitech, Gasmet manufacturers portable and fixed gas analysers (FTIR, TLD, CVAF) which are used withing a variety of areas including:-

Aluminium Production
Carbon Capture & Storage (CCS)
Cement
Fertiliser and Nitric Acid Production
Power Plants
Raw Gas Measurements
Small Waste Incineration
Stack Testing
Waste Incineration

For software to operate with Gasmet Analysers see CEMS Software

General Electric was founded in 1892 and operates in the CEMS industry via its ‘Air quality and pollution control services’ division focusing on services to manage SOx, particulate matter (PM) emissions and nitrogen oxides (NOx).

For software to operate with General Electric Analysers see CEMS Software

Horiba was founded in Japan in 1953 and operates in a variety of areas - one of which is environmental. This covers the following industries:-

Biomass Power Generation
Industrial and Medical Gases Production
Iron and Steel Production
Oil Refinery
Petrochemical Industry
Thermal Power Generation
Waste to Energy Power Generation

For software to operate with Horiba Analysers see CEMS Software

AMETEK was founded in 1930 and the emissions industry is serviced by the Process & Analytical Instruments Division .
In 2006, AMETEK acquired Land Instruments International (AMETEK Land) to manufacture industrial sensors and measuring devices such as:-

Fixed Spot Non-Contact Thermometers / Pyrometers
Fixed Thermal Imagers and Line Scanners
Portable Non-Contact Thermometers
Portable Gas Analysers
Opacity and Dust Monitors
Carbon Monoxide Detectors

These technologies operate in the following industries:-

Steel
Aluminium
Speciality Metals
Glass
Hydrocarbon Processing (HPI)
Minerals
Power Generation

For software to operate with Land Ametek Analysers see CEMS Software

OPSIS is a Swedish company which was founded in 1985 and operates in the gas analysis and process control markets covering ambient air quality monitoring (AQM) and continuous emissions monitoring (CEM).
OPSIS operates in the following industries:-

Aluminium
Brick
Cement
Chemical
CO2 Capture
Fertiliser
Glass Manufacturing
Mercury Monitoring
Mineral Wool Production
Mining & Smelting
Palm Oil
Power
Steel
Sulphuric Acid Production
Waste to Energy

For software to operate with Opsis Analysers see CEMS Software

Protea was founded in 1996 and specialises in the manufacture and sale of Continuous Emission Monitoring Systems (CEMS) and process analyser systems.
Protea manufactures extractive and in-situ analysers using a variety of techniques such as:-

Infrared (IR)
Fourier Transform Infrared Spectroscopy (FTIR)
Ultra Violet (UV)
Tuneable Diode Laser (TDL)
Mass Spectrometry (QMS)

The Protea products are found in a variety of industries including:-

Aluminium
Automotive
Biogas
Cement
Chemical
Fertiliser
Glass
Incineration
Landfill
Marine
Paint
Pharmaceutical
Pulp / Paper
Refineries
Steel

These industries are serviced by the following products:-

atmosFIR Range (Fourier Transform Infrared (FTIR)
P5000 (UV Diode Array)
ProMass (Quadrupole Mass Spectrometer)
IR Photometer P2000 and P300 (Selective Analyser Technology)
Solus Range (Tuneable Diode Laser)

For software to operate with Protea analysers see CEMS Software

Sick AG was founded in Germany in 1946 and manufactures a wide variety of sensor solutions for industrial applications.
Having operated in the UK since 1973, Sick supports multiple industries such as:-

Biomass
Building materials
Chemicals
Energy from waste
Mining
Petrochemicals
Power
Refineries
Waste and recycling

For software to operate with Sick AG Analysers see CEMS Software

Siemens AG was established in Germany in 1847 with the Process Analytics division being responsible for the manufacture of CEMS Systems. Solutions offered include cold-extractive, hot-extractive, and in-situ automated monitoring systems.

For software to operate with Siemens Analysers see CEMS Software

Teledyne Monitor Labs (TML) was founded in 1969 and specialises in the continuous emission monitoring industry (CEMS) offering solutions in industries including:-

Agriculture
Cement
Chemical
Lime
Oil/Gas Refining
Paper
Petrochemical
Power Generation
Pulp
Steel

Technologies used include:-

Continuous Real-time Particulate Matter Mass Monitoring
Flame Ionization Detector
Chemiluminescence
UV Absorption
Non-Dispersive Infrared (NDIR)
Ultraviolet (UV) Fluorescence

For software to operate with Teledyne Monitoring Labs Analysers see CEMS Software

Thermo Fisher Scientific was founded in 1956 in the USA and manufactures scientific instrumentation which is used for Continuous Emissions Monitoring.
Thermo Fisher Scientific products are capable of measuring a variety of emissions including:-

SO2 (Sulfur dioxide)
NOx (Nitric oxide)
CO (Carbon monoxide)
TRS (Total Reduced Sulfur)
NH3 (Ammonia)
HCl (Hydrogen chloride)
THC (Total Hydrocarbons)
HG (Mercury)
O2 (Oxygen)
PM (Particulate Matter)
H2S (Hydrogen Sulfide)
Flow
Opacity

For software to operate with Thermo Fisher Analysers see CEMS Software

Valmet was established in Finland in 2013 (following a demerger with the Metso Corporation) and focuses on automation systems and services for the energy, pulp and paper industries.
Valmet provides solutions across a variety of industries including:-

Alternative fuels
Biofuels and biomaterials
Chemical
Fibreboard
Filtration
Marine
Minerals and metals
Oil and gas
Paper
Petrochemical
Pharmaceutical
Wastewater

For Continuous emission monitoring and reporting Valmet offers products for:-

Waste incineration plant emission monitoring
Large combustion plant emission monitoring
Quality assurance for CEMS analysers
CO2 Monitoring

For software to operate with Valmet Analysers see CEMS Software

CEMS Manufacturers

EmiDAS and CEMWindows can interface with analysers manufactured by companies all over the world. This page lists a number of companies that manufacturer CEMS Systems and analysers all of which can integrate with G2 Data Systems software.

EmiDAS and CEMWindows can interface with analysers manufactured by companies all over the world.
This page lists a number of companies that manufacturer CEMS Systems and analysers all of which can integrate with G2 Data Systems software.